Snow Melting Systems

A heated path made simple and safe.

Driveway & Walkway Snow Melting

Warmup systems are ideal to provide snow-free access to the house and prevent injuries on stairs and walkways. They are commonly used in concrete pours, asphalt driveways and paved walkways.

Choose from pre-sized snow melting mats that are installed within concrete, asphalt, or pavers. For a custom layout, snow melting cables are ideal.

For Concrete/Asphalt

Warmup snow melting mats can be installed directly on an existing concrete or asphalt surface before an additional 2” pour or can be laid on a drained gravel base before a new pour. For an asphalt installation Warmup does recommend hand rolling the surface. During installation it is important not to use equipment over 1 ton.

Shop now

For under pavers

Heated walkway pavers offer the best of both worlds: style and function. During a typical paver installation snow melting mats or cables are laid on a drained gravel base followed by a layer of sand or fine gravel. This layer should be at least 1”. Once this is done, the pavers can be laid.

Shop now

for custom layouts

shop now

snow melting controls

A Warmup electric heated driveway system wired to a controller is designed operate automatically. As it monitors moisture, temperature, and precipitation, the controller will turn the system on to heat the surface just above freezing. Wi-Fi systems are also available and activates based on the weather forecast, so it can preheat the slab before snowfall. Large commercial controls with GFEP protection are also available. Contact us for a detailed proposal.

Wi-fi based system

The WSM-252W will check the weather forecast to anticipate snow fall and pre-heat your driveway. Through the Warmup WSM app, the system can thus operate without snow sensors and parameters can be tailored to operate the system with less wattage and amperage, thereby reducing running cost.

shop now

DS series

The DS Series, offering 1 or 2 x 30 amp contactors, is useful when you are heating small or several areas like; your driveway, walkway, stairs and can even be combined with your roof and gutter system. With a built-in moisture and temperature sensor, these controls activate only when necessary.

shop now

WSM-63

The WSM-63 offers both manual and optional sensor operation of your snow melting system. With a capacity of up to 252A (up to 1,500 sqft of snow melting) is suited for both residential and commercial environments. The simple ‘on/off’ button allows you to trigger the system manually. But it can be paired with an DS-2C sensor to operate automatically.

Shop now

COMMERCIAL USE

Shop now