Atlas Plus Carpeted Tile

ATLASPLUS-CHAR

Regular price$202.99
/

Estimated Ship Date: 21 November 2024 - 28 November 2024

Atlas Plus Carpeted Tile
Atlas Plus Carpeted Tile

The ultimate ribbed tile, Atlas Plus provides unwavering durability in any high-traffic space.

Great for designers looking for linear textured tiles with superior scraping performance.

  • High-performance needle-punched construction
  • Made to perform using solution-dyed, UV stabilized ASOTA ® polypropylene fiber
  • Highly versatile 
Mat Color Primary Backing
Carbon TacFast™ Backing Only
Charcoal Bitumen Backing Only

 

Construction  Non-woven/needle-punched
Surface Aspect Corduroy pattern
Fiber 100% solution-dyed UV stabilized ASOTA® polypropylene
Pile Height (± 0.5mm) 0.375"
Total Height (± 7.5%) 0.50"
Pile Weight (± 7.5%) 60 oz/sy
Total Weight (± 7.5%) 170 oz/sy
Tile Size (± 2%) 19.69" x 19.69"

ELECTROSTATIC PROPERTIES

Dimensional Stability (EN 986)  Pass
Electrostatic Propensity (EN 1815) >2kV
Electrical Resistivity (IBM / ICL) Pass, for R.H. ≥40%
Sound Insulation (ISO 10140-1:2010) ≥24dB
Thermal Retention (ISO 11092) 0.13 m K/W Pass

FLAMMABILITY

Radiant Panel (ASTM E648)  Class II
Smoke Density (ASTM E662) Pass
Surface Flammability (FF 1-70 / ASTM D2859) Pass

Before laying tiles, it is recommended they are stored at room temperature 60°F-70°F (15°C-20°C). The tiles can be loose laid on flat, dry floors free from impurities such as oil, grease etc. Cracked floors should be filled, and uneven floors covered with hardboard. Dusty floors should be primed. Because of the high insulation value of these tiles it is not recommended they be laid when under-floor heating systems are in use.

On very large installations, it is advisable to secure 1 in 5 rows with double-sided tape Where tiles are to be used under caster chairs, tiles should be fully secured. The tiles may be laid by marking across in the center of the room and working outwards from this, the marker cross may be moved to facilitate these of full tiles in doorways, etc.

Tiles must be laid by turning alternate tiles through 90 degrees to obtain a checker pattern. An arrow on the back of each tile indicates the pile direction. Only tiles with the same batch number should be laid together.

Regular vacuuming (Weekly in low-traffic areas, and daily or twice daily in areas with higher traffic) with a motor-driven brush and beater bar can remove up to 80% of surface dirt, and is the easiest way to prolong the life of your carpet. Regular vacuuming is key to maintaining your carpet, but eventually the carpet color dulls from dirt and grime stuck in the fibers. The dirt is then carried further into the building to form more soil reservoirs.

Additionally, the oil content (15%) of the soil causes particles to stick to carpet fiber and resist vacuuming. To restore the carpet to its best condition, frequent light cleaning gives the best result and is often very cost effective.

 

SUGGESTED USES (NOT LIMITED TO)

  • Office Environments
  • Airports
  • Conference Rooms
  • Lobbies
  • Libraries
  • Retail/ Department Stores
  • Resorts
  • Restaurant Entryways
  • Spas
The perfect carpet tile for you

With our wide variety and selections, we have the exact carpet tile to fit your needs. An abundance of color selections lets you choose what suits your space.

Modular sizes, easy set-up

Our modular carpet tiles makes for easy installs and customization. Make a patterned design or designate specific areas with our variety of colors.

all carpet tiles


Recently viewed