Keeping the pathway up to your home or building can be crucial in creating a safe environment for your family and guests. Slip and fall accidents are one of the leading causes of injury during the winter and are only made worse by the conditions we face here in Canada.
The Hot Step Snow Melting Heated Mats are specifically designed to take a beating from the harsh Canadian weather and keep automatically melting snow so that you don’t have to get out a shovel and engage in hours of back-breaking labour.
Canadian designed to keep your entrances, driveways, walkways, and stairs safe. These rubber heated mats are UV protected, and strong enough to handle the weight of cars.
Build your ideal Hot Step Snow Melting Heated Mats System today.
Hot Step Snow Melting Heated Mats require at least 1 GFCI Power unit to plug into your outlet at home. See more in the specifications.
Note: Hot Step Snow Melting Heated Mats is only compatible with this GFCI Power unit which is sold separately.Not compatible with older K Series Snow Melting Mats. If you have purchased K Series Mats in the past, please click here
Hot Step Snow Melting Heated Mats and K-Series Snow Melting Heated Mats are not compatible and cannot be connected together. Each series utilizes different connectors and power configurations, making them incompatible for combined use. For optimal performance and safety, ensure that only mats from the same series are used together.
It is not recommended for cars to be parked on the Hot Step Mats for extended periods of time. This may cause the tires to overheat and get damaged.
Specifications
Mat Type
Size
Voltage
Wattage
Amperage
Thickness
Walkway Mat XL
1500 x 1000MM 59.1” x 39.4"
120V
600W
5.3A
10mm
Walkway Mat
1200 x 900MM 47.3” x 35.5"
120V
430W
3.9A
10mm
Passageway Mat
1200 x 510MM 47.3” x 20.1"
120V
240W
2.1A
10mm
Doormat
600 x 1010MM 23.7” x 39.8"
120V
240W
2.1A
10mm
Stair Mat
270 x 960MM 10.7” x 37.8"
120V
90W
0.8A
10mm
Installation
BEFORE YOU START 1. Check that the delivery note is correct compared to what has actually arrived. 2. Perform a visual control a. Visible damage on the cable b. Visible damage on the plugs/packaging c. Visible damage on the mat/power cable
ASSEMBLY OF HEATING MATS
Before installing the heating mats: Remove ice and snow from the area where you want to use the mats, you can also place the mats directly on snow and ice if needed. Warning: Do not walk on the mats until it has melted down to solid ground. Make sure the surface is free from sharp objects like stones, glass, nails, etc., which can damage the mats.
Interconnecting heating mats: All models are constructed with waterproof connector plugs so that all the different models can be serial connected. Please tightly snap the male and female connectors together.
Connection of power supply: The power cable can be connected to the first or the last mat in the system. Before you connect the power supply, always make sure that all the mats are thoroughly connected together first. The mats should be connected to a grounded electrical outlet.
Fastening the mats: The mats are all equipped with eyes (holes) in each corner. This makes it possible to fasten the mats so they do not slide/move. Use stainless or galvanized screws suitable for the surface. If the surface is suitable, also double sided tape can be used as alternative way of fastening the mats. If the incline is more than 20 degrees, we recommend to use a jointing plate to avoid that the mats are sliding/moving.
Electrical Requirements
Hot Step Snow Melting Heated Mats requires a GFCI Power Unit (sold separately). The GFCI Power Unit turns off the power if any of the electric current begins leaking to the ground. It is important to test the GFCI Power Unit each time the mat is installed and before use.
Here is all you need to do:
1. Locate the test and reset buttons on the Power Unit. 2. Plug the power cord into the outlet. 3. Alternately press the RESET and TEST buttons. 4. Each time you press the RESET button, the power light should turn on. If the light does not come on, make sure there is voltage at the outlet. 5. Each time you press the TEST button, the power light should turn off. 6. Leave the Power Unit with the light turned on. If the Power Unit does not operate as described above,do not use the mat. Call customer service at (800) 624-0041.
Power the Hot Step Snow Melting Heated Matswhenever there is a threat of snow or ice. It is a good idea to unplug it when there is no snow or ice. Before storing the mat, clean it with mild soap and water, and place it in the original packaging. Store the mat indoors after the winter season. It is important to store the mats immediately after the winter ends. Failing to do so may expose the mats to excessive summer UV sunlight, harming the mats over time.
Surface Suitability
Hot Step Snow Melting Mats are safe to place on a variety of surfaces, including:
Concrete: Concrete surfaces, such as driveways or sidewalks, are highly suitable for these snow-melting mats due to their durability and ability to withstand heat.
Asphalt: Asphalt surfaces also handle heat well, making them a common choice for snow-melting mat installation.
Pavers: These snow melting mats can be safely placed under pavers if they are properly installed and provide good drainage.
Stone or Tile: These materials are often used for patios or walkways, and these snow-melting mats can be installed beneath them with proper precautions.
Wooden Decks: Some of these snow-melting mats are compatible with wooden surfaces, but it's important to check the product details to avoid potential warping from heat.
Synthetic Surfaces (Composite Decking): These snow melting mats can be used on synthetic decking.
Turf or Artificial Grass: These snow melting mats are okay to use on turf or artificial grass.
FAQs
1.) Is it safe to drive over the Hot Step Snow Melting Heated Mats? The Hot Step Snow Melting Heated Mats Mats are very durable and will handle normal vehicular traffic in standard wintery environments. However, it is important to make sure the ground surfaces under the mats are clear of any sharp objects that could puncture the mat. If you have questions about the durability of our mats in your specific vehicular situation (i.e., many large trucks on a regular basis), please call HOTSTEP technical support team at (800) 624-0041
2.) Why don’t the mats feel warm when I touch them? When you turn on the mats, they may not feel warm to the touch, but that’s ok. This is especially true when the air temperature outside is very cold. This is because the temperature of your hand is greater than the temperature of the mat. But if you are concerned, check to see that the light on the mat’s plug is illuminated. If it is, these mats are on and they’ll melt snow. If after the first snow fall it appears the mats are not melting snow, call our troubleshooting team at (800) 624-0041
3.) Are the power units waterproof?
The power unit on the mat is certified as “rainproof”, but it is not submersible. Therefore, please be careful not to lay the mat’s power unit in an area that will collect a lot of water, such as a small ditch. While the mats themselves are very waterproof, the power unit, however, cannot be exposed to excessive amounts of water. It is the best to make sure the power unit hangs from the outlet in a vertical manner at least 18” from the ground. However, if the power unit will be laying in a horizontal manner on a sidewalk or ground, it is the best to wrap the power unit in a plastic bag to keep as much water away as possible. Do not make the plastic bag air tight, because it is important to make sure any water that may get inside the bag has a way to exit. The purpose of the bag is to keep excessive amounts of water away
4.) Can I leave the mats on all the time?
Yes, you can run these mats all winter long without damaging the mat, but your electricity bill will be higher than normal. It is the best to only use the mats when you are expecting snow. Alternatively, you can use any of our thermostat accessories to automate the operation of the mats. This will save your time and money and ensure that the mats turn on even if nobody is there to turn them on (like in the middle of the night)
5.) Can I place the mat on any surface?
Some surfaces (e.g., stamped concrete) have special coatings or sealers that may get harmed if exposed to heat. If you have a surface that you think may have a special coating on it, you should put a thin heat blocker under the mats. This blocker can be in the form of plywood, outdoor carpet or turf, thin insulation, etc. Putting a heat blocker underneath the mats will force the heat upwards away from the sidewalk, preserving the special coating on the sidewalk.
6.) Are the snow melting mats safe to drive over, and can I park my vehicle on them?
Hot Step Snow Melting Mats are designed to be durable enough to drive over, supporting the weight of cars, trucks, and SUVs. However, we do not recommend parking vehicles on the mats for extended periods, as prolonged contact with heated surfaces can potentially overheat tires and may damage the vehicle.
Complete Your Setup with Compatible Accessories
Complete your Hot Step Snow Melting Mats with our compatible accessories designed to improve efficiency and convenience. These add-ons make installation seamless and ensure optimal performance in any weather condition.
Designed for ultimate snow-free areas ensuring safe and clear pathways, drastically reducing the risk of slip and fall accidents.
Safety and Convenience Combined
Quality Rubber Material
Embrace winter without worry with our Hot Step Snow Melting Heated Mats. Made with durable rubber, these mats are a testament to durability and reliability, ensuring clear, safe paths even in the harshest Canadian winters.
The innovative design automatically melts snow, eliminating the need for laborious shoveling and preventing slip-and-fall accidents.
UL & CSA Safety Standards for Electric Heating Appliances
UL 499: Certified Safety for Electric Heating Appliances Our electric Hot Step Snow Melting ats meet strict U.S. safety standards, minimizing risks like shock and fire, for safe and reliable home and commercial use.
CSA C22.2 No. 72-10: Trusted Canadian Safety for Portable Electric Heaters Our Hot Step Snow Melting Mats also meet Canada’s top safety standards, offering quality and reliability for Canadian homes and businesses.
Our heating products guarantee top-level safety and reliability for home and commercial use, giving you peace of mind while using efficient, high-quality electric heating solutions.
Illuminated Pathways and Snow-Free Surfaces Combined
Hot Step Glow Snow Melting Heated Mats
Combine efficient snow-melting technology with a luminescent strip that glows in the dark, ensuring enhanced safety and visibility at night.
The glow strip creates a clear, illuminated path, making it easier to navigate walkways, driveways, and entrances during low-light conditions.
Enjoy the convenience of snow-free surfaces with the added benefit of nighttime guidance, perfect for preventing slips and falls.
Ensuring Safe and Clear Pathways
Ultimate Snow-Free Areas
UV-protected and built to perform in extreme winter conditions, Hot Step Snow Melting Heated Mats efficiently heat up to 7-10°C above the ambient temperature, melting up to 2" of snow per hour.
These mats ensure your pathways stay clear and safe during the harshest snowy months.
Perfect for maintaining snow-free spaces in key areas:
Hot Step Snow Melting Mats work by heating to just above freezing, melting snow on contact to keep walkways, driveways, and stairs clear and safe. Made from durable, weather-resistant materials, they’re designed for tough winter conditions. The mats can be easily connected to cover large areas, offering efficient, energy-saving snow and ice removal for both residential and commercial use.
How do I connect multiple mats to cover a large area?
Hot Step Snow Melting Mats are designed with easy-to-use male and female connectors, allowing you to daisy chain mats together and create custom pathways. Unlike other mats, our connectors snap together effortlessly, even in cold conditions or with gloves on.
How much snow can the mats melt per hour, and how quickly do they work?
Our mats can melt 1.5 to 2.5 inches of snow per hour. However, performance depends on factors such as pre-existing snow or ice and the ambient temperature.
How energy-efficient are the mats, and will they increase my electricity bill?
Thanks to advanced heating film technology, our mats are about 20% more energy-efficient than other snow melting mats. They melt snow faster at the same wattage, meaning you’ll save around 20% on electricity compared to less efficient options.
Are the mats waterproof and safe to leave outside all winter?
Yes, the mats are waterproof and made to withstand harsh weather. Constructed from heavy-duty rubber and equipped with watertight electrical connections, they’re safe to use outdoors, even in rain and snow, all winter long.
Can the mats handle heavy vehicles like trucks or SUVs?
Absolutely. Hot Step Snow Melting Mats feature a durable, heavy-duty rubber construction with an enclosed heating film, making them strong enough to to handle the weight of cars being driven over them.
Are the mats safe to use on stairs and uneven surfaces?
Yes, our mats are specifically designed for stairs and other uneven surfaces, reducing the risk of dangerous slips and falls.
