Sport Wall Pads

The closed-cell polyethylene foam in these Sport Wall Pads is engineered with individually separated air bubbles that create a firm, durable top layer. This construction delivers heavy-duty, shock-absorbing properties, making the wall padding ideal for use in gyms, schools, and sports facilities. 
Designed to withstand the demands of high-level athletic competitions, these foam wall mats provide maximum impact protection and long-lasting performance.

• Made out of 16 oz. reinforced vinyl.
• Antibacterial and Antifungal Vinyl
• Each walling pad is antibacterial, antifungal, and stain-resistant, ensuring long-lasting hygiene, these tumbling mats are highly resistant to mildew, rot, and water and are free from any toxic material or chemicals.
• Constructed with 1 3/8” cross-link foam wall backed by a 7/16” wafer board for heavy-duty protection in gyms and sports facilities.
  
• Each Mat is made up of 2' x 6’ panels. There is a 1” lip on the top and bottom where pads are screwed to the wall
• Double-stitched with heavy-duty nylon thread for extra strength, making these wall pads durable even in high-traffic sports arenas.
• The safety wall pads can be easily cleaned with mild soap and water.

Ensure your Sport Wall Pads are installed securely and correctly for maximum athlete protection and a professional finish. Follow these simple steps:

What You’ll Need:

• Level or laser guide

• Electric screwdriver or power drill

• Stud finder (for drywall installations)

• Screws appropriate to your wall type (wood screws for drywall studs, masonry anchors for concrete/brick walls)

• Optional: Liquid Nails or construction adhesive

• Pencil or painter's tape for marking

• Two people (recommended for safe and accurate installation)

Step 1: Mark a Guide Line

• Use a level or laser to draw a horizontal line marking the top edge of your wall pads.

• Choose your starting height (just above the baseboard or higher) based on your facility layout.

• This ensures a straight, consistent row of pads.

Step 2: Locate Wall Studs (If Applicable)

• Use a stud finder to locate and mark the studs along your guide line.

• Anchoring screws into studs ensures maximum stability.

• For masonry walls, skip this step and proceed with anchors suited for concrete or brick.

Step 3: Attach the Wall Pads

• (Optional) Apply small dollops of Liquid Nails adhesive to the back of each pad to help keep it flush.

• Align the top 1” lip of the pad with the guide line.

• Use your screwdriver to secure screws through the 1” lip at the top and bottom of each pad.

  • 2–3 screws per top and bottom edge is recommended.

• Make sure pads are tightly spaced to avoid gaps.

• If using multiple pads with graphics or logos, lay them out first to ensure correct visual alignment.

 Final Tips:

• If using Liquid Nails, wait 24 hours before heavy use to allow full adhesive curing.

• To clean, simply wipe the vinyl surface with mild soap and water.